250 – 2,650 kW

Products / Power Train Marine / Gearboxes for Inland Waterway Vessels / WAF/LAF 164-573



Gearboxes of the WAF, WGF and WGV series have been specially designed for work boats such as inland waterway vessels, tugs, trawlers, ferries and special-purpose ships with similarly high performance demands. We have the backing of over 80 years of experience in the manufacture of marine gearboxes and use state-of-the-art design and production technologies. Due to their design for specific areas of application, the hydraulically operated reverse-reduction gearboxes of the WAF, WGF and WGV series offer various special advantages:

  • High operating reliability
  • Sturdy design
  • Simple operation and maintenance
  • Compact dimensions
  • Low operating noise
back

Approved quality

Several renowned classification societies have granted REINTJES permission to conduct inspection and approval procedures themselves. In the same way many gearbox types come with a type approval or full classification for the main classification societies (IACS members). Since 1990 REINTJES has been certified to DIN ISO 9001/EN 29001.

  • WAF 164–464
  • WAF 542–563, WGF 562
  • WAF 665–863, WGF 665–863
  • WGV 482
  • Ratings
  • Standards
  • Options
  • Classification
Basic Equipment
  • Housing made from grey cast iron or steel
  • Prepared for mounting of SAE bell housings (WAF/LAF 164-763)
  • Spur wheels helically toothed, case hardened and tooth flank ground
  • Built-in hydraulically operated disc clutches with steel/sinter friction surface
  • Smooth engagement through adapted pressure increase during shifting
  • Full power transmission in both output senses of rotation
Basic Equipment
  • Integrated oil sump. Common circuit for operating pressure and lube oil. Oil pump and oil filter accessible from the outside
  • Rigid mounting (WAF 164-562)
  • Fitted heat exchanger for cooling water inlet temperature of max. 32° C, seawater resistant
  • Connection facility for remote supervision of pressure and temperature
  • Built-on control valve, electrically or pneumatically operated (WAF 665-863, WGF, WGV) or mechanically operated (WAF 164-563)
  • Emergency control: in case of failure of operating pressure the disc clutch can be locked mechanically
  • Input: free shaft end with taper 1: 30
  • Output: forged-on-flange
  • Output: counter flange (WAF 164-563)
  • Supervision (WAF 665-863) 1. Pressure switch – operating pressure too low 2. Thermometer – oil temperature behind heat exchanger 3. Duplex temperature sensor (2xPT100) behind heat exchanger 4. Filter contamination – electrical components 5. Pressure gauge – operating oil pressure 6. Connection facility for pressure switch: clutch engaged AHEAD/ASTERN
  • Paint coating with synthetic resin varnish. Colour: RAL 7023 concrete grey
Basic Equipment
  • Rigid mounting (WAF 164-563)
  • SAE bell housing (WAF/LAF 164–763 only)
  • Output: counter flange
  • Flexible coupling
  • Supervision instruments
  • Power Take Off incl. SAE pads
  • Spare part kit as per classification rules
  • Paint coating with synthetic resin varnish in all RAL colours
  • Heat exchanger for cooling water inlet temperature higher than 32° C
  • Trolling valve (WAF 665-863)
  • Resilient mounting (WAF only)
  • Special reduction ratios
  • Connection facility for electric stand-by pump and/or trailing pump
  • Flange on engine side
Continuous Duty
  • Continuous operation at rated engine speed
  • Average engine operating hours: unlimited
  • Allowable hull forms: no restrictions
  • Allowable applications: no restrictions
Zertifizierte Qualität

REINTJES hat bei namhaften Klassifikationsgesellschaften den Selbstabnahmestatus erlangt. Ebenso erhalten viele Getriebetypen die Typenzulassung oder volle Klassifikation für die großen Klassifikations-gesellschaften (IACS Mitglieder). Seit 1990 ist REINTJES nach DIN ISO 9001/EN29001 zertifiziert